Desensitized Case / Fluorite

Plant trial on a high-silica low-grade fluorite ore

With grinding, flotation flowsheet, major equipment and operating practice essentially unchanged, the collector scheme was switched from conventional oleic acid to HBYS-1 fluorite collector and continuous plant indicators were tracked.

Trial Background

Evaluating plant response through shift-by-shift data

The feed was dominated by SiO2 and CaF2, with high silica content and low CaF2 grade. The plant operated a flowsheet of one roughing stage, six cleaning stages and four scavenging stages. The comparison base used six shifts over three days under conventional oleic acid; the HBYS-1 period tracked twelve continuous shifts.

Collector dosage1100 → 800

g/t, approximately 27.3% reduction

Average fluorite concentrate grade96.08 → 96.20%

Maintained and slightly improved at lower dosage

Average tailings grade4.88 → 4.22%

Lower fluorite loss in tailings

Average output11.82 → 12.05 t

More stable continuous operation

01

Improved impurity indicators

Average CaCO3 decreased from 1.02% to 0.88%, and average SiO2 decreased from 1.54% to 1.48%.

02

Stable flowsheet conditions

Grinding, flotation circuit, main equipment and operating practice were essentially unchanged during the trial.

03

Traceable results

Conclusions are based on continuous shift statistics, suitable for judging reagent adaptability in the existing plant system.

Back to Fluorite Product